3M 6003 Organic and Acid Cartridge for 6000, 7000, FF-403 Respirators

NIOSH-approved for respiratory protection against certain gases or vapors

Versatile, ergonomic, and simple to install

Designed to enhance field of view and comfort on the job, these gas/vapor cartridges feature a low-profile, swept-back design. The 3M™ Gas/Vapor Cartridges are easy to install. Plus, these cartridges are compatible with 3M™ 6000 Series Half Facepieces, 6500/6500QL Series, 7500 Series, 6000 Series Full Facepieces, FF-400 Series, 7800 Series, 3M™ Scott™ AV- 3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.

Easy breathing 

3M™ Gas/Vapor Cartridges are designed to balance breathability and long service life. Gas and vapor cartridges use carbon particles to adsorb contaminants, filtering the air that you breathe. 3M™ has designed our cartridges to be easy to breathe through and long lasting by optimizing the layers and depth of the carbon bed, geometry of the cartridge body, and carbon particle size. 

Help protect your workforce

After you've determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding cartridges. 3M™ Gas/Vapor Cartridges are NIOSH-approved and help provide respiratory protection from certain gas or vapor concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA PEL with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to life or health (IDLH) or contain hazardous levels of airborne particulates.

Features and Specs:

• Organic vapor or acid gas cartridge
• Swept-back design for enhanced field of view and balance
• Use with 3M Reusable Respirators
• NIOSH approved for protection against certain organic vapors or acid gases
• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M™ half and full facepieces and certain 3M™ Scott™ full facepieces
• Wide range of applications reduces inventory needs
• 2 per pack

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.