3M DBI SALA 1003006 Pass-Through Design 6' Beam Anchor

Our tie-off adaptor is our most versatile anchorage connector combining ease of use, light weight and high strength (5,000 lb. Min. tensile strength). It provides you with an anchorage connector that can be used almost anywhere an anchorage point is needed.

Meets or Exceeds ANSI Z359.18, OSHA 1910.140, OSHA 1926.502

Features and Specs:

• Pass-through design makes attaching to anchorage quick and easy
• 1-3/4" polyester strength member (5,000 lb. Min. tensile strength)
• 3" wide polyester wear pad for added abrasion resistance and product longevity
• 6 ft. in length
• Coated steel hardware for corrosion resistance and strength
• Weight capacity: 310 lb ANSI / 420 lb OSHA

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.