3M DBI Sala 1246414 Force2 Shock Absorbing Lanyard 6'

DBI Sala 1246414 Force2™ Shock Absorbing Lanyard 6 ft. (1.8m) single-leg web Force2™ with aluminum snap hook at one end, aluminum Comfort Grip snap hook at leg end.

The Force2™ lanyard is ideal when there is no overhead anchorage and your only option is to tie-off at your feet. It can be used for up to a 12 ft. (3.7 m) free fall, or as a standard lanyard up to a 6 ft. (1.8 m) free fall for workers that require a capacity of 311 to 420 lbs. (141-190 kg). This lanyard also features the WrapBax™2 features including a 5,000 lb. (22 kN) gated hook and heavy-duty abrasion resistant 13,000-pound (58 kN) tensile strength webbing, making it ideal for the rigors of tie-back use. WrapBax™2 eliminates the need for a separate anchorage connector, thus reducing inventory and cost, simplifying inspections, training and improving compliance. They feature the world’s smallest and lightest shock absorber and our exclusive Hi-10™ Vectran™ energy management materials that provide second-to-none abrasion, cut and chemical resistance and efficient shock absorption. Should a fall occur, the lanyard and it’s unique energy absorbing system will activate stopping the fall and reducing the forces imposed on the user to safe levels. Our patented self-locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way - even with gloves on.

Meets or Exceeds ANSI A10.32, ANSI Z359.13, OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req.

Features and Specs:

• 6 ft. (1.8m) single-leg lanyard
• Transverse load rated self locking/closing aluminum Comfort Grip connector
• Force2™ 12 ft. free fall (3.6m) and dual capacity rated
• Extremely compact and lightweight
• Exclusive Hi-10™ Vectran™ energy absorption system
• Abrasion resistant polyester webbing
• User friendly aluminum self locking snap hook
• Built-in reflective materials
• Impact indicator
• Protected labels, equipped with i-Safe™
• Capacity 130-310 lbs
• Comfort Grip Connector 

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.