3M DBI SALA 3101526 Nano-Lok Quick Connect Self Retracting Lifeline 8'

DBI SALA 3101526 Nano-Lok Arc Flash 8 ft. (2.4m) of 3/4" (19mm) Kevlar® fiber webbing and steel snap hook, quick connector for harness mounting.

Nano-Lok™ is ergonomically designed for ease-of-use and is ideal for direct connection to most harnesses. The extremely compact and lightweight design is virtually unnoticeable on your back, staying out of the worker’s way and making it ideal as a lanyard replacement. Whether your application requires single or twin leg configurations, mounting to an overhead anchor or for connection directly to harness, there are dozens of models to choose from to suit almost any application. Nano-Lok™ locks quickly—stopping a fall within inches—providing more protection at low heights. In addition, tension is always kept on the lifeline, which reduces dragging, snapping and trip falls. Both features are key safety improvements.

Meets or Exceeds ASTM F887, ANSI Z359.14, OSHA 1910.66, OSHA 1926.502, ANSI A10.32, Capital Safety Gen. Mfg. Req.

Features and Specs:

• Arc flash rated
• Built-in connector for single-leg SRL direct attachment to harness
• 8 ft. (2.4m) 3/4" (19mm) Kevlar® fiber webbing lifeline
• Self-locking snap hook on lifeline
• Tough and impact resistant thermoplastic housing
• Swiveling anchorage loop
• Quick activating speed sensing brake system
• High capacity energy absorber and impact indicator protected by Kevlar® fiber cover
• i-Safe™ equipped
• Wide variety of configurations available
• Capacity 420 lbs

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.