3M DBI SALA 3326350 Rollgliss R550 Rescue and Descent Device 350ft
DBI SALA
3M DBI SALA 3326350 Rollgliss R550 Rescue and Descent Device 350ft
- 3326350
- Bulk Pricing:
- Buy 10 or above and get 3% off
DBI SALA 3326350 Rollgliss™ R550 Rescue and Descent Device 350 ft. (107 m) rescue and descent kit with rescue wheel, humidity storage case, two 4 ft. (1.2m) anchor slings, one 2.5 ft. (0.76m) anchor sling, three carabiners, edge protector, pulley, rope grab and carrying bag.
The Rollgliss™ R550 offers the choice of controlled descent rescue, evacuation or the versatility of assisted rescue with lifting capabilities. This state-of-the-art, fully automatic controlled descent device can be used for rescue and evacuation from heights up to 1,640 ft. (500m) for one user 310 lbs. (141kg) or 575 ft. (175m) for two users totaling 620 lbs. (282kg). It features 3/8 in. (9.5mm) super static kernmantle rope, and is configured with connecting hardware at each end of the lifeline to operate in both directions. During assisted-rescue scenarios, a fallen worker can be attached to the R550 device, raised to a point that allows their fall arrest device to be removed, then lowered to the ground safely. Remember, during an emergency every second counts! You can count-on and trust the DBI-SALA™ Rollgliss™ systems, in use all over the world; Wind Turbine Construction & Maintenance, Utility Pole/Tower Construction & Maintenance, Fire & Emergency Rescue Services, Commercial Construction Sites, Industry and MRO Facilities, Government & Military Operations and more!
Features and Specs:
- Emergency rescue and evacuation from a wide variety of elevated work areas
- Fully automatic controlled descent
- Bidirectional design enables multiple rescues
- Built-in rescue lifting wheel
- Humidity resistant storage case with external humidity indicator
- 350 ft. (107 m) 3/8" (9.5 mm) kernmantle rope lifeline
- Rated for up to 1,640 ft. (500 m) height for one user, 575 ft. (175 m) for two users
- Compact and lightweight design
- High strength corrosion resistant construction
- Integrated rope ears
- Dual brake design
- Equipped with i-Safe™
- Kit also contains 3 anchor slings, 3 carabiners, pulley, edge protector, rope grab and carrying bag
- Other standard and custom lengths are available
- Models also available without lifting wheel or humidity case.
For industrial/occupational use only. Not for consumer sale or use
Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.