3M DBI SALA 7400054 Rebar/Shear Stud HLL Intermediate Retrofit Kit

DBI SALA 7400054 Intermediate retrofit kit to configure SecuraSpan™ intermediate stanchion to fit rebar/shear stud from I-beam type stanchion.

Extremely lightweight and portable, these systems incorporate a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can be up to 60 ft. (18.3 m) and with the optional bypass brackets, the system can be configured to run indefinitely for ultimate jobsite flexibility. You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That’s why safety engineers and site directors choose DBI-SALA® horizontal lifelines. We offer the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and rigorously tested to meet regulations. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points.

Features and Specs:

• Intermediate retrofit kit allows SecuraSpan™ I-beam stanchion to be converted over to rebar/shear stud
• Includes rebar/shear stud base and intermediate bracket
• Fits rebar or shear stud 1/2 in. to 1 in. diameter (#4 to #8 rebar) and 4 in. to 12 in. center to center (10.1-30.5 cm)
• Lightweight and portable design
• Top mounted bolt and clamp adjustment system
• Extremely durable construction
• Single and multi-span indefinite length system configurations
• Pass-thru 100% tie-off protection
• Flexible system capacity
• Various lengths and individual components are available

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.