3M V-100 Supplied Air Respirator Vortex Cooling Assembly (AAD)

This supplied air respirator assembly, when used with approved breathing tube and headgear, can help regulate the flow and temperature of supplied air system. Cools the air up to 50°F (28°C). Includes the cooling tube, waist belt and holder.

3M Supplied air respirators require a source of clean breathing air such as plant air systems or bottled air. This clean, breathable air can be delivered to hoods, helmets, full facepieces, half facepieces and loose-fitting facepieces. Supplied air respirators offer many features over traditional respiratory protection, such as cooling or heating incoming air; fit testing only required for tight-fitting facepieces; and low maintenance. Complete systems include a supplied air hose, an air regulating valve, a breathing tube, and a helmet, hood, or other facepiece. Potential benefits include: • A cost-effective way to provide a high level of respiratory protection • 3M’s range of supplied air valves can cool or heat air by up to 50°F (28°C) • No filters, cartridges, or batteries to maintain • Supplied air provides no additional breathing resistance to the wearer The vortex assembly can cool compressed air by as much as 50°F (28°C). It can operate on pressures ranging from 60-90 psig, depending on hose length. Assembly includes:

• Cooling tube with quick disconnect fitting
• Waist belt
• Holder

Features and Specs:

• Cools the air up to 50°F (28°C).
• Includes the cooling tube, waist belt and holder

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.