3M X3A PELTOR X3 Earmuffs (AAD) Over-the-Head 10 EA/Case

The X-Series earmuffs are 3M’s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X3A features a newly designed spacer to help improve attenuation without the need for a much larger cup or double cup design. This lightweight earmuff is designed for protection against hig H-level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as “dielectric”.
- The wire headband offers consistent pressure over prolonged wearing periods
- Earcup pivot points tilt for optimum comfort and efficiency
- Replaceable ear cushions and foam liners (hygiene kit HYX3)
- Noise Reduction Rating (NRR)b 28 dB. CSA Class AL

NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ”dielectric”. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided. Hearing Protection Solutions Made Innovatively Easy™.

Features and Specs:

• Over-the-head hearing protection with Noise Reduction Rating (NRR) of 28 dB for moderate to high noise exposure
• Twin headband design helps reduce heat buildup with good fit and balance
• Wire headband offers comfortable pressure during prolonged usage
• Earcups tilt to ensure a customized fit and comfort for individual users
• Electrically insulated (dielectric) wire headband helps reduce exposure to electrical hazards

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.