For very large confined spaces this large, 16” axial blower delivers high output for drawing or pushing air. The durable and tough metal housing holds a 6 blade impeller. Designed for applications requiring a large amount of output. This standard model blower has a ½ HP motor with an efficient sixblade impeller in a rugged metal housing. Certified to CSA Standard C22.2 No.113.

Features and Specs:

CONSTRUCTION:

• Complete unit epoxy powder coated in orange
• Interchangeable flange for intake or exhaust side mounting
• 18 gauge cold rolled steel housing
• Integrated carrying handles
• Steel/chrome plated grill
• Equipped with four rubber feet
• Can be used with Adaptor Reducer (PN: 9600-50) used with 8” (20.3 cm) duct

MOTOR:

• HP: ½ HP
• Certifications: UL Recognized, CSA Certified
• Voltage/Hz: 115V AC, 60 Hz, Single Phase
• RPM: 1725
• Current Draw: 7.2A
• Cord: 25’ (7.62 m) 16/3 AWG, SJTW 90C 300V medium duty
• Plug: NEMA 5-15 (Grounded three-prong)

FAN:

• Glass reinforced Polypropylene (PPG) six blade fan, with aluminum hub
• Moving fan mounted 1 5/8”(4.12 cm) from grill for safety, grill gap-5/16”(0.79 cm)

DUCTING: (Optional)

• Black, single-ply, neoprene coated, statically conductive vinyl/polyester material, temperature resistant up to 250° F (121.1° C)
• Retractable, non-collapsible design, Class 1 hard drawn spring steel wire helix (meets ASTM 227 specs)
• WARNING: When using statically conductive ducting, the integrated grounding wire must be properly grounded to the blower chassis OR linked to any additional grounding wire or duct used (as shown). Refer to User Manual for detailed instructions