Allegro Five-Worker Wall-Air Filter Panel without CO Monitor 9875-40W/O
Allegro
Allegro Five-Worker Wall-Air Filter Panel without CO Monitor 9875-40W/O
- 9875-40W/O.
- Bulk Pricing:
- Buy 4 or above and get 3% off
Allegro 9875-40W/O Five-Worker Wall-Air Filter Panel without CO Monitor
Allegro's Air Filtration Panels convert shop air used for pneumatic tools and equipment to clean breathable air. They provide from 1 to 8 airline respirators a portable source of up to 15, 30, 60 or 100 CFM of breathable air from 5-125 psig. The 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants. An optional carbon monoxide monitor, which can be operated in AC or DC mode, activates an audible alarm when the concentration of CO exceeds 10 ppm (set for 5 ppm in Canada).
The pressure regulator includes a pressure gauge and adjustment knob with locking ring. An adjustable pressure relief valve protects the CO monitor and respirators in the event of regulator failure. Available with and without CO monitors. All models meet NIOSH requirements for point-of-attachment. Allegro air filtration panels filter impurities and hydrocarbons from an air compressor to convert to breathable air. To meet OSHA requirements an optional CO monitor is available for continuous monitoring of carbon monoxide levels. Panel provides up to 60 CFM (101.94 m3 /hr) of air within a 5-125 PSI (.34-8.62 bar) range.
Features and Specs:
Construction:
- A 12 gauge, black powder coated steel bracket for mounting
- All brass plumbing with quick-disconnect Hansen couplers
CO Monitor:
- Power Source: 115V AC to 9V DC power adapter for continuous power supply 9V DC Alkaline battery (primary or as back up for AC adapter)
- Alarm Setting: 10 PPM (Canada: 5 PPM)
- Ext. Connections: Optional strobe light alarm
- Audible: 90 decibel Piezo alarm
- Visual: External power LED light signal
- Sensor: Electrochemical, replaceable
- Display: Liquid crystal
- Keys: Mode & Set
- Modes: Normal operation, peak, battery charge and calibration mode
- Calibration: Self adjusting calibration to 20 PPM CO
Filtration System:
- First Stage: 5 micron particulate filter element and automatic mechanical drain
- Second Stage: 0.010 micron coalescing filter element and manual drain
- Third Stage: 0.003 ppm activated carbon filter element and manual drain
- Regulator: High pressure, adjusting pressure knob, ABS cover, 0-160 psi (0-11.03 bar) pressure gauge and an external relief valve set at 125 psi (8.62 bar)