BW BWC2-H Single Gas H2S Monitor
BW Technologies
BW BWC2-H Single Gas H2S Monitor
- BWC2 H
- Bulk Pricing:
- Buy 50 - 99 and pay only $83.00 each
- Buy 100 or above and pay only $82.00 each
BW BWC2-H Single Gas H2S Monitor
The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously — no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime. Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you’re not using it for a week or more — and extend its life by that period of time. Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.
Meets or Exceeds Class I, Div. 1, Gr. A, B, C, D, Class I, Zone 0, Group IIC, CE 0539 II 1G Ex ia IIC T4 Ga IP66/67 DEMKO 14 ATEX 1356
Features and Specs:
- Hibernation mode with case accessory or IntelliDoX
- Automatic logging of the 35 most recent gas events and bump test results
- Configuration of high and low alarm set points before the device is activated
- Compatible with IntelliDoX, microdock II and fleet manager II software
- Ip 66/67- can be submerged up to 1 meter
- Default Alarm Setpoints at 10 ppm and 15 ppm
- Alarm Setpoints range: 1.6 ppm to 20 ppm
- Detector measuring range: 0-100 ppm
- Affordable, with low cost of ownership
BW Clip Specifications:
- Weight: 0.6 lbs.
- Temperature: -40 to 122 Degrees F
- Humidity: 5 - 95 percent RH (non-condensing)
- Alarms: Visual, vibrating, and audible
- Typical Battery Life: Two years
Honeywell CLIPHB-CASE BW Clip Hibernation Case (Optional)
CLIPHB-CASE Features:
- Alarm type: Audible Visual Vibrating
- Battery Run Time: 2hours
- The BW Clip Series of single-gas detectors provides up to three years maintenance
- Free operation: Just turn on the device and it runs continuously
- No need for calibration sensor replacement battery replacement or battery charging.
- For Use With: BW Clip
- Gas Type: H2S CO O2 LEL SO2
- Maximum Temperature: 50degree Celsius
- Minimum Temperature: -40degree Celsius
Gas Meters are not eligible for returns or exchanges