Guardian Series 3 Harness with D-Rings and Waist Belt (PT Chest TB Legs)

Expanding upon the wide array of features offered by the Series 1, the Guardian Series 3 full-body harness offers the worker at height an extra measure of comfort and performance. Series 3 harnesses feature durable water-repellant, contrasting core webbing that makes any damage easy to see, greatly improving the inspection process. Snap-on shoulder pads increase comfort and are removable for washing.

The SRL connector loop allows you to mount a personal SRL while keeping the D-ring free for incidental tie-offs. An available waist belt is articulated for an ergonomic fit, helping to support heavy tools or just providing extra support for a long day’s work, and the laminated waist belt will not fold during use. Webbing ends are folded and stitched with rubber tabs for durability, and rubber web keepers prevent loose straps from interfering with your work.

Dual lanyard keepers safely store unused lanyard legs, and the spring-loaded torso adjusters make fitting the harness fast and precise. Available with or without side, shoulder, or sternal D-rings, and with quick-connect, pass-through, or tongue-and-grommet buckles. See complete parts list for more information.

Meets or Exceeds ANSI Z359.11-14, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910

Features and Specs:

• Assembled in USA
• Water-repellant, contrasting core webbing
• Snap-on shoulder padding
• Ergonomic waist belt optional
• Worker Capacity Range: 130-420 lbs
• Side D-Ring: Yes
• Sternal D-Ring: No
• Shoulder D-Ring: No
• Buckle Configuration: PT Chest / TB Waist / TB Legs
• Webbing Material: Polyester.
• D-Ring / Buckle Material: Steel.

Application

• Personal Fall Arrest: May be used as a component of a PFAS. Structure must withsatnd loads applied in the directions permitted by the system of at least 5.000 lbs. Maximum free fall is 6', unless used in combination with equipment explicitly certified for extended free fall. Applicable D-ring: Dorsal.
• Restraint: May be used in restraint applications. Restrain systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed lenght of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system of at least 1.000 lbs. No free fall is permitted. Restraint systems may only be used on surfaces with slopes up to 4/12 (Vertical/Horizontal). Applicable D-ring: Dorsal, Chest, Side & Shoulder.
• Work Positioning: May be used in work positioning applications. Work positioning system as allow a worker to be supported while both hands. Structure must with stand loads applied in the directions permitted by the system of at least 3.000 lbs. Maximum allowable free fall is 2'. Applicable D-ring: Side.