Miller DH-8ZP/ Wall Mount Sleeve (Zinc Plated)

Zinc plated* mild steel or stainless steel construction. Compact design creates minimum intrusion into work space. Mounts to vertical concrete or steel structures. Comes with PVC sleeve liner.

Features and Specs:

• Color : Silver
• Finish : Zinc Plated
• Height : 9-1/4"
• Item : Confined Space Hoist Wall Mount Sleeve
• Length : 10"
• Material : Steel
• Width : 4-1/4"
• Bearing Material : PVC Pipe, ASTM-D-1785
• Mounting Holes : 4
• Tensile Strength : 5000 lb.
• Standards : OSHA, ANSI & CSA
• Max. Working Load : 450 lb.

Mounting Requirements (Minimum)

The structure and mounting hardware must be capable of withstanding a 90,000lbs (10,170Nm) moment and a 5,000lb (22.2kN) vertical load. Installation MUST be approved to local regulations by a qualified engineer. 

Application Restrictions

1. Sleeves are for use with approved masts and accessories ONLY.
2. System design factor depends on other system components and the configurations in which they are assembled. The minimum design factor for all standard MILLER DuraHoist mast and accessories is 4:1.
3. All welding is to be carried out by qualified personnel.
4. If base material does not meet minimum requirements, reinforcement MUST be added to meet minimum requirements.
5. Each installation MUST be approved to local standards by a qualified engineer.

https://www.millerfallprotection.com/en/products/descentrescue%20and%20confined%20space/miller-durahoist-portable-confined-space-system