MSA IO4 Automated Gas Meter Test System

The io 4 Dock enables effortless calibration and bump testing which helps to improve compliance and safety. When in the io Dock, the Altair io 4 portable gas detector knows when it needs a bump test and immediately runs the appropriate test. When the ALTAIR io 4 is in the Dock, all compliance reporting is sent immediately to your MSA Grid account, helping to minimize the risks associated with manual record keeping or data file management.

Features and Specs:

• Simultaneous testing of multiple detectors and sensor configurations
• Test bank can include up to three cylinder holders and 10 test stands with no messy calibration gas tubing
• Gas Cylinders can be RFID-enabled or manually configured
• Cylinder Holder LEDs provide Light band indication of low, empty, or expired calibration gas
• No networking required for compliance reporting to the cloud-based MSA Grid account
• The display indicates current Bank status including current cylinder expiration and pressure in PSI or Bar, while Test Stand LEDs and display indicates current test and test stand status
• The io4 Dock Leverages the ALTAIR io 4 connectivity for fast, correct test system setup with no complex user-interface
• Test Modes include:
• Bump test only
• Calibration only
• Bump test with calibration on failure of bump
• Smart Mode - Dock will perform a bump test or calibration as required by the Grid-configured gas detector settings without user intervention

Kit Includes: 

MSA 10242927 ALTAIR io4 5-Device Smart Charger:

• The ALTAIR io Charge can charge up to five io 4 wearable detectors and has the same size profile as the io Dock test stand. Detectors are inserted face up, with charging pins to rear. 
• Green light indicates not charging which means fully charged or no instrument inserted. Red light indicates the unit or units are charging. Each multi-unit charger requires an individual power source.
• Unit can be used as a stand-alone device or mechanically attached to a MSA io 4 Calibration Station.

MSA 10242913 ALTAIR io4 Dock Cylinder Holder

• Each holder is equipped with an RFID reader, automatically recognizing MSA calibration gas cylinders with RFID tags. This feature ensures accurate cylinder data tracking and alerts on gas expiration.
• Automated data detection automatically detects critical gas cylinder data such as gas type, concentration, expiration date, lot number, and part number when using RFID-tagged MSA calibration gas.
• The MSA io Gas Cylinder Holder plays a crucial role in maintaining the precision and reliability of your Altair io 4 Automated Calibration System, ensuring that your gas detection equipment functions at peak accuracy.
• This cylinder holder is an invaluable tool for industries where accurate gas detection is critical, such as oil and gas, mining, construction, and emergency response.

MSA 10242914 ALTAIR io4 Dock Test Stand

• Automated Testing simplifies calibration and bump testing processes, with smart recognition of required tests for the ALTAIR io 4.
• Wireless integration features Bluetooth 4.0 and IEEE 802.11 b/g WLAN for future enhancements, alongside Ethernet connectivity while cloud reporting needs no additional connectivity required for reporting Bank status.
• Seamless compliance presents direct cloud-based reporting to MSA Grid account, eliminating manual record-keeping and data file management risks.

MSA 10048280 Calibration Gas Cylinder (CH4/LEL, O2, CO and H2S)

• All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS.
• Calibration gas cylinder 1.45% CH4, 15% O2, 60 ppm CO, 20 ppm H2S
• Sizes 34L