The FIRST Protecta harness is Lightweight, valuable for your money, and a full body harness that has a rear fall arrest attachment point. It has a sub-pelvic support strap and 5 points of adjustment including on the legs, chest and torso. It also has tongue buckle leg straps, pass-thru buckle chest and torso adjusters for better comfortability. Meets or exceeds all OSHA and ANSI requirements. (Universal Sizing)

Meets or exceeds OSHA 1926 and ANSI Z359 performance criteria

Features and Specs:

• Capacity 310 lbs. (141 kg)
• Dorsal D-ring and side D-rings
• Tongue buckle leg straps, pass-thru buckle chest and torso adjusters
• Supple back plaque
• Universal sizing
• 1 3/4” wide polyester web- blue
• Minimum tensile strength >5,000 lbs.
• Zinc plated stamped steel
• Net Weight 1.71 lbs.

For industrial/occupational use only. Not for consumer sale or use 

Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.